![]() Type the name you'd like to give your printer and click Add.įor the Wasp2040 and the Wasp4070 printers these settings are: Settings If you cannot find a profile matching your printer on the list, select Non-Networked Printer, then Custom, and then Custom FFF Printer. At the time of writing, Prusa Mini+'s need to be added as custom 3D Printers.įor Prusa printers, consider using PrusaSlicer instead. To add a Prusa, select Prusa3D and then Prusa i3 Mk3/Mk3s. (The Ultimaker in the Fab Lab is an Ultimaker 2+ by the way). To add an Ultimaker, select one of the models at the very top of the list. There are many profiles already in the software - and good news(!), if your printer is on the list, just assign a name and then add it.Įnter your printer name at the bottom, and click Add Printer to finish the setup process. If you can't find your material and you add a new material, you can set up propereties like Display Name, Colour as well as properties like Density, and Cost which are used in calculating the weight and cost of each print, shown after you slice your model.Ĭlick the icon above, or in the file menu, go to Settings > Printer > Add Printer. If the printer is set up as a Networked Printer, you will have options to transfer by WiFi.Ĭhoose materials from the middle tab.Save to Disk lets you save your file to your local disk so you can manage it yourself.If you have the SD card connected to your computer, the next step will say Save to Removable Media,.Get a breakdown of the time calculated by clicking the i.If you change the Color Scheme to Line Type, it can help you differentiate support, infill and other lines. Note there is a vertical slider on the right that you can move down to look through the layers. Inspect your model by clicking the Preview options.Click the blue Slice button at the bottom right.Your options can show Recommended, for beginners, or Custom, which has the full list of all options, including many experimental settings. It may say something like "Normal - 0.2mm", which is the name of the profile, click it to expand. This is accessed on the top right of the screen.There are two icons that allow advanced per-model settings and support blockers. With a model selected, the menu that appears on the left-hand-side allows you to position, scale, rotate and mirror.You may have more than one on the print bed in the same job. Click the folder icon, top left, or you can drag-and-drop an.You can download it from - Current version 5.0. Ultimaker Cura is a very popular slicer software developed by Ultimaker. By Ger Walsh, Tonino Rizzo, Liam Hurley - March 2020
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |